XSYM-02 High-pressure hose deflection-free hydraulic pulse tester

XSYM-02 High-pressure hose deflection-free hydraulic pulse tester

Overview:

XSYM-02 pulse test device conforms to GB/T5568-2006/ISO6803:1994 standard, it is a standard device for testing rubber, or plastic hoses and hose assemblies without deflection test. It is suitable for the pulse test and pressure test of high-pressure hydraulic hose and hose assemblies which are subjected to pulse pressure in use.

Technical parameters:

Supply Voltage

 AC380V ±10% 50HZ ±1% (three-phase five-wire system) sample size (statistics) 4
Maximum power consumption 51.5KW Setting Pulse Rate

0-2Hz Acquisition speed 500Hz

Overall dimensions

 (1) Test bench 2000 (length) × 1200 (thickness) × 2000 (height) (2) Hydraulic pump station 2000 (L) × 1200 (Thick) × 2200 (H) (3) Electrical control box 900 (L) × 650 (Thick) × 2000 (H)

(4) Cooling unit 2500 (L) x 1200 (Thick) 1000 (H)

 Specimen length

1) The nominal inner diameter of the hose in 22mm (including 22mm) or less according to the formula (2) 180 ° bending, free length = π (r + d / 2) + 2d ............... (2) The nominal inner diameter of the hose more than 22mm calculated according to formula (3) 90 ° bending, free length = π / 2 (r + d / 2) + 2d .................. (3) where: r -Minimum bending radius; d - hose outer diameter

Weight

 1.86T Maximum pressure 100MPa
Test Fluid According to GB/T3141-1994, the test liquid should meet the requirements of N46 at 40℃. Maximum number of pulses

999,999 times.

Test temperature setting range

 50-150℃ Temperature control accuracy ±3 degrees

 

  

Related products