SLXS-DC rubber and plastic low-temperature brittleness testing machine compressor refrigeration

SLXS-DC rubber and plastic low-temperature brittleness testing machine compressor refrigeration

Overview:

SLXS-DC rubber and plastic low-temperature brittleness tester is to determine the maximum temperature of the material under the specified conditions when the specimen is damaged by the impact, i.e. brittleness temperature, can be used for comparative appraisal of the performance of plastics and other elastic materials at low temperatures. Can determine the brittleness temperature of different rubber materials or different formulations of vulcanized rubber and the advantages and disadvantages of low temperature performance. Therefore, it is indispensable in the quality inspection of scientific research materials and products, and the control of production process. This instrument is designed according to the national standard GB/T1682-1994, and the technical indexes are in line with the requirements of national standards such as HG 2-162-1965 Plastic Low Temperature Impact Compression Test Method and GB5470-2008 Plastic Impact Brittleness Temperature Test Method.

Technical parameters:

Test temperature and time

 -80 degrees (normal more than 1 hour) cooling time is short, without water cooling, more environmentally friendly
impact velocity

2m/s±0.2m/s

Temperature fluctuation during the test 3min time after constant temperature

 <±0.5℃ small fluctuation, more accurate temperature control
Distance from center of impactor to lower end of gripper

11±0.5mm

Dimensions

 760*550*1300
power (output)

800W power is smaller, after reaching the temperature of the compressor there is an automatic shutdown, more environmentally friendly energy saving

capacity

3500 ml Larger volume, wider test range

Related products